When a mid-range Pixel 3 phone showed up a couple of weeks ago with a “Lite” tag attached and a codename of “sargo,” we wondered if a second mid-ranger would soon surface. A previous “bonito” codename had been shared, yet has been surprisingly absent with all of the other Google leaks around. Over the weekend, that 2nd device may have surfaced in high-res renders.
Currently being referred to as the Pixel 3 Lite XL, this new device arrives through @onleaks as 3D CAD renderings, likely from a case maker. While not official images of the device from Google, these types of renderings are almost always spot on.
The images actually reveal both the smaller Pixel 3 Lite and Pixel 3 XL Lite from all angles. You can see the comparison is size above, an additional shot below, and a video tour too.
What we’re being told by these images is that each body will be a two-tone plastic mold, rather than glass. Neither phone will have notches, but they will be of similar size to the regular Pixel 3 and Pixel 3 XL. The Pixel 3 Lite will have a 5.5-inch display in a body that measures 151.3 x 70.1 mm, while the Pixel 3 Lite XL will jump to around 6-inches and a frame of 160 x 76.1mm. Both phones will sport 1080p displays.
Specs are a mystery, but that previous leak I referenced showed a Snapdragon 670 processor, 4GB RAM, 32GB storage, 2915mAh battery, 12MP rear camera, 8MP front camera, and a headphone jack for the smaller Pixel 3 Lite. The XL model might not be all that different, outside of a battery bump.
Liking what you see?
// 91 Mobiles
This post was last modified on March 18, 2019 4:07 pm